在基于IOS的交換機上設置主機名/系統名:
switch(config)# hostname hostname
在基于CLI的交 換機上設置主機名/系統名:
switch(enable) set system name name-string
2.在基于 IOS的交換機上設置登錄口令:
switch(config)# enable password level 1 password
在 基于CLI的交換機上設置登錄口令:
switch(enable) set password
switch(enable) set enalbepass
3.在基于IOS的交換機上設置遠程訪問:
switch(config)# interface vlan 1
switch(config-if)# ip address ip-address netmask
switch(config-if)# ip default-gateway ip-address
在基于CLI的交換機上設置遠程訪問:
switch(enable) set interface sc0 ip-address netmask broadcast-address switch(enable) set interface sc0 vlan switch(enable) set ip route default gateway
4. 在基于IOS的交換機上啟用和瀏覽CDP信息:
switch(config-if)# cdp enable
switch(config-if)# no cdp enable
為了查看Cisco鄰接設備的CDP通告信息:
switch# show cdp interface [type modle/port]
switch# show cdp neighbors [type module/port] [detail]
在基于CLI的交換機上啟用和瀏覽CDP信息:
switch(enable) set cdp {enable|disable} module/port
為了查看Cisco鄰接設備的CDP通告信息:
switch(enable) show cdp neighbors[module/port] [vlan|duplex|capabilities|detail]
5. 基于IOS的交換機的端口描述:
switch(config-if)# des cription des cription-string
基 于CLI的交換機的端口描述:
switch(enable)set port name module/number des cription-string
6.在基于IOS的交換機上設置端口速度:
switch(config-if)# speed{10|100|auto}
在基于CLI的交換機上設置端口速度:
switch(enable) set port speed moudle/number {10|100|auto}
switch(enable) set port speed moudle/number {4|16|auto}
7.在基于IOS的交換機上設置以太網的鏈路模式:
switch(config-if)# duplex {auto|full|half}
在基于CLI的交換機上設置以太網的鏈路模式:
switch(enable) set port duplex module/number {full|half}
8.在基于IOS的交換機上配置靜態VLAN:
switch# vlan database
switch(vlan)# vlan vlan-num name vlan