device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1 flags 0x1
device vga0 at isa?
# syscons is the default console driver, resembling an SCO console
device sc0 at isa? flags 0x100
# Floating point support - do not disable.
device npx0 at nexus? port IO_NPX irq 13
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
device rl # RealTek 8129/8139
device xl # 3Com 3c90x
device lnc0
at isa? port 0x280 irq 10 drq 0 # VMware Nic
# Pseudo devices - the number indicates how many units to allocate.
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
pseudo-device md # Memory "disks"
上面的內核基本上是一個系統要運行的最小配制了，當然如果你的機器不同具體也不同，大家按自己的情況來定，我的機器配制是：
CPU: Pentium III 733Mhz
MotherBoard: Via 693A Chipset
NIC: Realtek 8139c
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1 flags 0x1
device vga0 at isa?
# syscons is the default console driver, resembling an SCO console
device sc0 at isa? flags 0x100
# Floating point support - do not disable.
device npx0 at nexus? port IO_NPX irq 13
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
device rl # RealTek 8129/8139
device xl # 3Com 3c90x
device lnc0
at isa? port 0x280 irq 10 drq 0 # VMware Nic
# Pseudo devices - the number indicates how many units to allocate.
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
pseudo-device md # Memory "disks"
上面的內核基本上是一個系統要運行的最小配制了，當然如果你的機器不同具體也不同，大家按自己的情況來定，我的機器配制是：
CPU: Pentium III 733Mhz
MotherBoard: Via 693A Chipset
NIC: Realtek 8139c
# $FreeBSD: src/release/picobsd/router/crunch.conf,
v 1.1.2.2 2001/02/20 02:53:35 luigi Exp $
#
# NOTE: the string "/usr/src" will be automatically replaced with the
# correct value set in 'build' script - you should change it there
# Default build options
buildopts -DNOPAM -DRELEASE_CRUNCH -DNOSECURE -DNOCRYPT -DNONETGRAPH -DNOIPSEC
